Abrasives

Abrasive flat tapes, premium - priced per roll approx. 50' long (Made in USA)
            #01 - 2/32”; #56 - 3/32”; #57 - 4/32”:180 grit: A/O $18.00 ~ S/C $24.00 

            #58 - 6/32”; 150 grit:  A/O - $19.00ea ~ S/C $25.00

            #59 - 8/32”: 150 grit:  A/O - $20.00ea ~ S/C $26.00

Abrasive round cords, Premium – priced per roll approx. 50’ long (Made in USA)

            #46S – 0.150”  120 grit – S/C $84.50

            #47S – 0.125”  120 grit – S/C $81.00

            #48 – 0.093”  150 grit - A/O $37.00

            #49 – 0.082”  120 grit - A/O $23.50 ~ S/C $30.00

            #50 – 0.070”  180 grit - A/O $22.75 ~ S/C $29.50

            #51 – 0.055”  120 grit - A/O $15.50 ~ S/C $22.50

            #52 – 0.055”  150 grit - A/O $15.50 ~ S/C $22.50 

            #53 – 0.040”  180 grit - A/O $15.75 ~ S/C $22.50

            #54 – 0.030”  200 grit - A/O $15.75 ~ S/C $24.00

            #54HS 0.025”; #55S 0.018”; #60S 0.015” - 200 grit – S/C  $16.75

            #66S – 0.012”  280 grit  S/C  $33.00

Shop rolls – A/O J-weight – Premium (P) made in USA – Economy (E) import

            1” x 50yds

            50 or 60 grit – P $15.50 ~ E $12.00

            80 grit – P $14.70 ~ E $12.00

            100; 120; 150; 180; 220; 240; 320; 400 grit – P $12.80 ~ E $10.50

            1.5” x 50yds

            50 or 60 grit – P $22.75 ~ E $15.75

            80 grit – P $20.00 ~ E $14.50

            100; 120; 150; 180; 220; 240; 320; 400 grit – P $18.50 ~ E $13.90

            2” x 50yds

            50 grit – P $29.25 ~  E $20.10

            60 grit – P $27.40 ~ E $19.05

            80 grit – P $25.25 ~ E $18.25

            100; 120; 150; 180; 220; 240; 320; 400 grit – P $23.80 ~ E $17.50 

Non-Woven hand pads – 6” x 9”

(Gray = 0000 steel wool ~ Green = 000 steel wool ~ Maroon = 00 steel wool ~ Brown = 0 steel wool)

            Maroon – Gen. purpose A/O V-fine - $1.20ea ~ 10+ $1.00ea ~ $37.00/60

            Gray – Ultra-fine S/C - $1.42/ea ~ 10+ $1.20ea ~ $50.00/60

            Brown – H.D. A/O coarse - $20.00/10 ~ $35.00/20 ~ $85.00/60

            Green – Industrial scouring - $0.95/ea ~ $10.00/20 ~ $27.00/60

Cloth Belts & Discs: Premium closed coat aluminum oxide, poly/cotton backing.

            1” x 21” price per 50                    3” x 21” price per 10                    3” x 24” price per 10

24Y -  $48.12                                           $13.20                                          $15.26

36X -  $46.56                                           $12.21                                          $14.12

40X -  $45.76                                           $11.72                                          $13.45

50X -  $44.64                                           $11.39                                          $12.88

60X -  $43.88                                           $10.97                                          $12.60

80X -  $42.68                                           $10.48                                          $12.11

100X    - - - - -                                           - - - - -                                          - - - - -

400X    $41.52                                         $10.23                                          $11.69

            6” x 48” price /10           9” PSA cloth disc /25                12” PSA cloth disc /25

24Y -    $52.78                             $51.52                                     $90.44

36X -    $48.28                             $46.02                                     $80.80

40X -    $46.04                             $41.58                                     $76.22

50X -    $43.85                             $40.98                                     $71.64

60X -    $42.07                             $38.64                                     $67.36

80X -    $40.36                             $36.48                                     $63.68

100X     - - - - -                             - - - - -                                      - - - - -

400X    $39.05                             $34.40                                     $62.76

Premium cabinet finishing paper, open coat A/O, A-weight maximum flexibility

9” x 11” - Grits: 100; 120; 150; 180; 220; 240 & 320 - $23.50 per 100 sheets

****  ON SALE  ****
PSA disc, paper back - PREMIUM - priced per roll of 100 discs (made in Finland)

    Premium Gold or White Aluminum Oxide Stearate-

5” – 80D grit - $25.00            

5” – 100/120/150/180/220/240/320 grit B weight - $23.99

6” – 80D grit - $31.00            

6” – 100/120/150/180/220/240/320 grit B weight - $29.99

            Case & half-case pricing available

 

Cleaner stick for all coated abrasives PREMIUM industrial grade MADE IN USA

 ON SALE           1.5” x 1.5” x 8”:  SCS8 - $7.99

 ON SALE           2” x 2” x 12”:  SCS12 - $12.99

Sanding, foam hand pad for 6” PSA discs:  SH6PSA - $7.00

Emery board, course & fine, 7.75”L, easily cut to any shape: NF20 - $0.12ea

Brushes

Brush, 10” parts cleaning:  BPC10  $2.25ea ~ $22.00/dozen

Brush, acid – 6” x 0.375”:  BA38   $1.50/dozen ~ $14.40/gross

Brush, wire, brass, mini 7” plastic handle:  BW7B - $1.00ea ~ $9.00/dozen

Brush, wire, stainless, mini 7” plastic handle:  BW7S - $1.00ea ~ $9.00/dozen

Brush, nylon, mini 7” plastic handle:  BW7N - $1.00ea ~ $9.00/dozen

Brush, hog hair, mini 7” plastic handle:  BW7H - $1.00ea ~ $9.00/dozen

Brush, wire, brass, 9” plastic handle:  BW9B - $1.10ea ~ $9.90/dozen

Brush, wire, stainless, 9” plastic handle: BW9S - $1.10ea ~ $9.90/dozen

Brush, wire, stainless, 10.5” shoe handle wood: BWSS - $1.50ea ~ $15.00/dozen

Brush, wire, brass, 10.5” shoe handle wood: BWSB - $14.00/six ~ $24.00/dozen

Brush, artist, 12pc set, chisel tip:  BA579 - $3.00

Brush, artist, 12pc set, round tip:  BA582 - $3.00

Brush, paint/chip, ½”, wood handle:  BC05 - $4.40/dozen

Brush, paint/chip, 1”, wood handle: BC10 - $5.00/dozen

Brush, paint/chip, 1.5”, wood handle:  BC15 - $5.60/dozen

Brush, paint/chip, 2”, wood handle:  BC20 - $6.80/dozen

Brush, paint/chip, 2.5”, wood handle:  BC25 - $8.00/dozen

Brush, paint/chip, 3”, wood handle:  BC30 - $9.20/dozen

Brush, paint/chip, 4”, wood handle:  BC40 - $14.00/dozen

Buffing

 ****  ON SALE  ****

Rouge – all bars 5” x 1” x 1.125”   $5.99/ea ~ 6+ (any combination) $4.99ea

   Red – stropping cutting tools, buffing non-ferrous precious metals.

   Green – color building on all metals, final finish on nickel, alum & stainless alloy

   White – excellent fine finishing & color building on all metals, low grease.

   Brown – Medium cut on ferrous metals, fast cut on non-ferrous metals & plastic

   Black – heavy cut on hard ferrous alloys, x-heavy cut on non-ferrous alloys

   Gray – most aggressive cutting on all materials.

   Pink – for pewter and other alloys containing copper, tin, zinc and/or lead.

   Gold – for tool & other hardened steels, chrome plating and high-chrome alloys

   Blue – color building on non-ferr., final finish on platinum, plastics & composites

Wheel, buffing, cotton, sewn, 10” x 3/4" bore, 3/4” face:  WBS10 - $16.00

Wheel, buffing, cotton, sewn, 8” x 5/8" bore, 3/4” face:  WBS8 - $10.00

Wheel, buffing, cotton, sewn, 6” x 1/2" bore, 3/4” face:  WBS6 - $7.50

Wheel, buffing, cotton, sewn, 4” x 1/2" bore, 1” face:  WBS4 - $7.50

Burrs, Points, Bobs & accessories

Burr, HSS, 8pc set, 1/8” shank, large head:  BS318 - $12.00

Burr, HSS, 10pc set, 1/8” shank, small head:  BS310 - $18.00

Point, Diamond, 20pc rotary, 3/32” shank: PD32 - $12.00

Point, Diamond, 20pc rotary, 1/8” shank: PD6 - $12.00

Point, Diamond, 6pc rotary, 1/8” shank, bullet nose: PD506 - $12.00

Point, Diamond, 10pc rotary, 1/8” shank: PD118 - $17.00

Point, Diamond, 30pc rotary, 1/8” shank: PD530 - $18.00

Point, Diamond, 50pc rotary, 1/8” shank: PD550 - $30.00

Point, Diamond, 10pc rotary, 1/4” shank, large head: PD47 - $22.00

Point, Diamond, 10pc rotary, 1/4” shank, small head: PD41 - $12.50

Bob, felt polishing, 8pc assorted shapes, 1/4” shank:  PFB14 - $14.00

Bob, felt polishing, 48pc assorted shapes, 1/8” shank: PFB18 - $27.50

Clamps

Clamp, wood, 4”, two jaw, two screw:  CW4 - $7.00

Clamp, wood, 6”, two jaw, two screw:  CW6 - $8.00

Clamp, wood, 8”, two jaw, two screw:  CW8 - $9.00

Clamp, wood, 10”, two jaw, two screw:  CW10 - $10.00

Clamp, wood, 12”, two jaw, two screw:  CW12 - $12.00

Clamp, three-way centering, 2.5” x 2.5”:  C403 - $5.00

Clamp, deep, 2.5” capacity, 4” throat depth:  C404 -$4.00

Clamp, spring, 6”:  C405 - $1.25ea ~ $12.00/dozen

Drills, Dremel, Router & associated items

ON SALE
Grinder, 42" flex-shaft, 120v, foot control & handpiece, 0-20k RPM:  GFS20K - $74.99

ON SALE  Bit, Forestner, 16pc set w/ wood box, 3/8” reduced diameter shank

(1/4,3/8,1/2,5/8,3/4,7/8,1,1-1/8,1-1/4,1-1/3,1-1/2,1-5/8,1-3/4,1-7/8,2,2-1/8):  BF16 - $24.99

Bit, brad point, 25pc set w/ metal index (1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2") Import:  BBP25 - $8.00

ON SALE  Drill, bit, micro, 20pc, 61 to 80”:  DM20 - $6.89

ON SALE  Drill, carbide, mini w/ rings, 5pc set (USA made):  DCM113 - $7.89

Countersink, HSS, multi-flute, 3pc set 1/2", 5/8”, 3/4”: CS3P - $6.50

Countersink, TiN coated HSS, multi-flute, 3pc set 1/2", 5/8”, 3/4”: CS3PT - $8.50

Universal pin chuck, 61 to 80, 1.375”L x 1/8” shank:  UP6180 - $3.65

Key, drill chuck, 4-way, small (fits most common chucks)Taiwan: KDCS - $5.00

Collar, shaft/drill-stop, 8pc (1/8~3/16~7/32~1/4~5/16~3/8~1/2): CDS8 - $4.50

ON SALE  Bit, router, carbide tip, 15pc set w/ box:  BRC15 - $29.99

Collet, Dremel type, 2pc set, 3/32” & 1/8”:  CD190 - $3.50

Reamer, hole, hand, 2pc, 1/8”-1/2” & 5/32”-7/8” w/ removable handles:  RS2 - $6.65

Drivers & bits

Hollow ground driver bit are tempered commercial quality.
Everyday low prices!  Bulk pack discounts available!

Bit, driver, hollow ground slot 3/16” x 1”:  BDS316 - $0.75ea ~ $4.00/10

Bit, driver, hollow ground slot 7/32” x 1”:  BDS732 - $0.75ea ~ $4.00/10

Bit, driver, hollow ground slot 3/16” x 1”:  BDS14 - $0.75ea ~ $4.00/10

Bit, driver, hollow ground slot 9/32” x 1”:  BDS932 - $0.75ea ~ $4.00/10

Bit, driver, hollow ground slot 5/16” x 1”:  BDS516 - $0.75ea ~ $4.00/10

Bit, driver, hollow ground slot 1/8” x 3”:  BDS183 - $1.00ea ~ $9.00/10

Bit, holder, quick-change chuck (not magnetic), 2.5”:  BHQ25 - $4.00

Driver, screw, 7pc wood handle (5slot, 2PH):  DS7W - $5.00

Driver, ratchet, offset screw bit w/bit assortment:  DSR141 - $6.00

Driver, ratchet, 90° screw bit 4” w/ bit assortment:  DSR184 - $6.00

Driver, ratchet, 90° screw bit 4”, 1/4” bit through-hole:  DSR117 - $5.00

Files

ON SALE Riffler, rasp, 8pc, 7.5” long, 1/8”W, double ended:  RR607 - $11.77

ON SALE Riffler, rasp, 8pc, 7.5” long, 17/64”W, double ended:  RR615 - $11.77

ON SALE  Riffler, file, 10pc, 7” long, 1/8”W, double ended, fine tooth:  RF612 - $9.99

ON SALE  Riffler, file, 10pc, 7” long, 17/64”W, double ended, fine tooth:  RF613 - $9.99

File, mini, 12pc, 4” long, single end, fine tooth:  MF12 - $10.99

ON SALE  File, Diamond, premium, 12pc tapered flat, 180, 240 & 320 grit, 7”L:  FDF112 - $19.99

ON SALE  File, Diamond, riffler, premium, 10pc, 240 grit, 5.5” long:  FDR10 - $12.99

ON SALE  File, Diamond, riffler, premium, 5pc, 240 grit, 5.5” long:  FDR5 - $7.75

ON SALE  File, Diamond, riffler, premium, 10pc, 240 grit, mini 5” long:  FDR2 - $10.50

ON SALE  File, Diamond, riffler, premium, 10pc, 240 grit, mico 4” long:  FDR36 - $7.75

ON SALE  File, Diamond, needle, premium, 10pc, 280 grit, 6.25” long:  FDN27 - $16.99

File, Diamond, assortment, 3pc (2 round needles, 1 cone):  FDA547 - $5.99

Hammers & Anvils

Hammer, 8” jeweler’s set (2 steel peen, 1 brass, 1 pick/cross): HJS4 - $12.29

ON SALE  Hammer, brass head, 2 pound:  HB2 - $24.99

Hammer, rubber mallet, 2 pound:  HRM2 - $6.50

Hammer, steel, sledge, 2 pound:  HSS2 - $6.65

Hammer, steel, sledge, 3 pound:  HSS3 - $8.40

Hammer, steel, cross peen, 3 pound:  HCP3 - $8.40

ON SALE  Anvil, 1lb cast iron, 2”H x 4.75”L, top & base surfaces are milled:  ANVIL1 - $4.75
ON SALE  Anvil, 2lb cast iron, 2.56”H x 5.25”L, top & base surfaces are milled:  ANVIL2 - $5.99

“CURVED”

“STRAIGHT”

Hemostat, 5” straight jaw:  H5S - $3.00

Hemostat, 5” curved jaw: H5C - $3.00

Hemostat, 7” straight jaw:  H7S - $5.00

Hemostat, 7” curved jaw:  H7C - $5.00

Hemostat, 10” straight jaw:  H10S - $8.00

Hemostat, 12” curved jaw:  H12C - $11.00

Pliers, 5.5” end nipper:  PL595  $4.25

Pliers, 6” angle needle nose w/ crimp/forming grooves & cutter: PL215 - $5.30

Pliers, 6” straight needle nose:  PL598 - $4.25

Pliers, 6” angle needle nose:  PL599 - $4.25

Pliers, 8” straight needle nose:  PL219  $5.00

Tweezer, 4pc (5.5” & 7” straight, 6” angle med & fine): TS4 - $6.50

Tweezer, 5pc 4.5”, 2 straight point, 1 angle point, 1 blunt, 1 spade: TS5 - $5.00

Tweezer, groove tip, locking, 5.75” stainless steel:  TGSL - $3.00

Hones & Stones

Stone, Silocon Carbide (premium), 6”, 6pc, sq, rnd, h-rnd, tri, rect & wedge:  S119 - $9.99

Stone, Silicon Carbide jobber stones 
S034-Oval - $2.99
S034-Rect - $2.99

Stone, A/O, fine & medium grit, generic, rect.: 6” S945 - $1.25  ~  8” S949 - $1.75

Stone, A/O, fine & medium grit, 3” round, generic:  S048 - $2.50

ON SALE  Stone, point & wheel dresser, 3.75”:  S941 - $3.99

ON SALE  Hone, diamond, knife, 400 & 600 grit:  HD34 - $9.99

Guide, honing, chisel type with roller:  GHCR - $10.99

Guide, honing, horizontal screw clamp type:  GHH5 - $7.75

Knives & blades

ON SALE Blade, hobby knife, 10pc replacement:  BHR10 - $2.79

Knife, 6” retractable, break-off tip:  KR245 - $2.25

            Replacement blades, 10pc:  KR246 - $1.85

Magnetic items

ON SALE  Magnet, 24” tool holder: MTH24 - $16.99

ON SALE  Magnet, 18” tool holder: MTH18 - $14.99

ON SALE  Magnet, 12” tool holder: MTH12 - $11.99

ON SALE  Magnet, 8” tool holder: MTH8 - $7.99

Magnet, parts tray, 9.375” x 5.375”, dual mag. (great for locks & triggers):  MT95  $6.95

Magnet, tool magnetizer/demagnetizer:  MTMD - $2.95

Magnifiers

Magnifier, clamp-on, 3.5” diameter, 19” long flex shaft:  MAG01 - $10.50

Magnifier, heavy base, 4” diameter, 10” long flex shaft:  MAG60 - $9.99

Magnifier, hand-held, 5x, 3.25” round:  MAG81 - $2.00

ON SALE  Magnifier, loupe, 20x double folding lenses 1” diameter, plastic:  MAG75 - $3.99

ON SALE  Magnifier, loupe, 15x triple folding lenses 1.75” diameter, plastic:  MAG28 - $3.99

ON SALE  Magnifier, loupe, 10x, one-piece jeweler’s, aluminum:  MAG12 - $3.99

Miscellaneous

ON SALE  Tack rag / cloth, 18” x 36”:  TR1836 - $1.00ea ~ $7.99/dozen

Carpenter pencil, 7.75”:  CP - $3.90/dozen

Carpenter pencil sharpener:  CPS - $2.50

Drafting/art set, 4pc, 45° & 60/30° triangle, 12” rule, protractor:  DS4 - $1.75

Chalk, powder, 4 ounce, Red or Blue - $1.75

ON SALE  Strainer, paint, 190 micron:  SP190 -
10pcs - $2.99
50pcs - $6.99
100pcs - $10.99
250pcs - $17.99
500pcs - $31.99
1000pcs - $55.99

ON SALE  Mat, non-slip, 12” x 60” roll:  MNS1260 - $6.99

Picks & Punches

ON SALE  Pick, heavy duty, 6pc stainless steel:  PHD6 - $7.99

Pick, light duty, 4pc stainless steel, double end:  PMD4 - $4.99

ON SALE  Punch, hole centering, 28pc, 3/32”-1/2” by 64ths & 17/32”:  PHC28 - $11.99

ON SALE Punch, 1/8” letter & number, 36pc:  PLN18 - $11.99

ON SALE  Punch, 5/32” letter & number, 36pc:  PLN532 - $11.99

ON SALE  Punch, 5mm letter & number, 36pc:  PLN5 - $9.99

ON SALE  Punch, 4mm letter & number, 36pc:  PNL4 - $9.89

Punch, pin, 18pc set, 8 brass, 8 steel, auto center punch & pouch:  PP18 - $10.80

            (1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4” & 5/16”)

Punch, 6pc pin, brass 3/32”, 1/8”, 5/32”, 3/16”, 1/4” + center, long pattern:  PB6S - $8.75

Punch, 6pc pin, steel 3/32”, 1/8”, 5/32”, 3/16”, ¼” + center, long pattern:  PS6S - $5.00

Punch, pin, brass, 8pc:  PPB8 - $9.99

Punch, brass & steel 8pc set (0.039”, 0.079”, 0.118” & 0.157”): P8BS - $7.99

Punch, center, 2pc set 1/8”x5” & 3/16”x6”:  PC2S - $3.50

Punch, automatic center, brass body 1/2” x 5”:  PACB - $3.00

Punch, hole, leather, heavy duty wheel type:  PHLW - $11.50

Punch, hole, leather, revolving wheel type, standard:  PHL1 - $4.00

Rules & Tapes

Ruler, stainless, 6” w/ drill gauge 1/16”-1/4” by 64ths: RS6G - $2.99

Ruler, stainless, 12”, one side inches, one side metric:  RS12 - $4.45

Ruler, stainless, 24”, one side inches, one side metric:  RS24 - $7.95

Tape, cloth, 60” inch/metric:  TC60 - $1.25

Tape, steel, 1/2” x 10’ (colors vary):  TS10 - $1.50

Tape, steel, 3/4" x 16’ (colors vary):  TS16 - $2.00

Tape, steel, 1” x 25’ (colors vary):  TS25 - $3.00

Tape, steel, rubber grip, 1.25” x 25’: TS25R - $5.25

Tape, steel, 1” x 33’ Clear/colors vary:  TS33 - $5.75

Storage

Combination wrench holder, 15 slot, plastic:  HW193 - $2.00ea

Combination wrench holder, 11 snap-in slots, 9.5” long:  HW278 - $3.25ea

ON SALE  Storage, burr stand, 3/32” x 30 holes, plastic:  SB332 - $2.99

ON SALE  Storage, burr stand, 1/8” x 30 holes, plastic:  SB318 - $2.99

ON SALE  Storage, burr stand, 1/8” x 48 holes, wood:  SBW418 - $7.75

ON SALE  Storage, burr stand, 1/4” x 48 holes, wood:  SBW414 - $8.75

Storage, drill, 29 hole, plastic, w/ raised numbers 1/16” to 1/2”:  SD29P - $1.25

Storage, drill, 29 hole, steel w/ stamped numbers 1/16” to 1/2”: SD29S - $2.99

Storage, 1/8” diameter x 2” long pegboard hooks:  PEG182  $1.75/10

Storage, 1/8” diameter x 4” long pegboard hooks:  PEG182  $1.95/10

Storage, 1/8” diameter x 6” long pegboard hooks:  PEG182  $2.45/10

Storage, 10pc, 5 pairs assorted screw-in hooks/hangers:  SH10 - $3.99

Storage, 8pc pillbox, snap-together, 1.25L x 0.75D x 0.75W:  SPB8 - $1.99/set

Storage, 12 compartment plastic, w/ adj. dividers, 10”L x 4.5”W x 1”D:  SPB12 - $3.69

Storage, 14 compartment plastic, 12.5”L x 8.75”W x 1.75”D:  SPB14 - $4.49

Storage, 3.5” hang-up box for peg board:  SHPB3 - $7.99/10

Vises

ON SALE  Vise, multi-position, 2” jaws, Alum. w/rubber jaw liners:  VMP2 - $24.75

ON SALE  Vise, multi-position, 4” jaws, Alum. w/rubber jaw liners (great for horns): 
VMP4 - $35.95

Vise, wood worker, 6” clamp or bolt down mount:  VWW6 - $15.99

Vise, drill press, 3”, 6L x 5W:  VDP3 - $13.99

Vise, mini 1”, clamp-on table:  VM1C - $5.25